How To Repair A Moen Kitchen Sink Faucet

How to Supercede a Kitchen Faucet

CCO/kaboompics/Pixabay

Kitchen faucets are probably one of the well-nigh used fixtures in homes. Many times a mean solar day the water is turned on and off, leading to quite a scrap of wear and tear on this hardworking fixture. If your faucet has seen better days, or is out of style, you lot can replace it with a shiny new version using just a few tools. Exchanging your old kitchen faucet with a new one can transform the wait and functionality of your kitchen in just a couple of hours.

Tools you'll Demand

Have all the necessary tools for this DIY project lined up before you offset to save yourself time and frustration.

• New Faucet
• Channel locking pliers
• Basin wrench
• Plumber'south Putty
• Adjustable Wrench
• Flexible supply lines
• Tape Measure out

Before Starting

Plow off the hot and cold water shut-off valves. they're usually located in the cabinet that's under the sink. And so open up upwardly the faucet to relieve pressure.

Removing the One-time Faucet

• Step Ane: Using an adjustable wrench and a pair of channel locking pliers, disconnect both the water lines from the faucet. If the supply lines are old, or the gaskets are worn out, y'all may want to replace them with flexible supply lines.
• Step 2: Using a socket wrench or basin wrench remove the nut that is property the faucet tailpiece associates in place. Sometimes information technology's hard to loosen old faucet basics, in that case attempt soaking the threads with penetrating oil and attempt over again.
• Stride 3: If your sink has a line that connects the hose to the faucet you can disconnect this.
• Step Iv: Pull the old faucet out and clean the sink'south surface making certain to remove whatsoever rust or caked on debris.

Installing the New Faucet

• Step One: Using the measuring tape, measure the altitude, from centre to center, of the outside holes of your sink. This is to make sure the new faucet will fit. Since all faucets are slightly different, read any installation instructions that come with your new faucet. Follow all manufacturer'due south pre-assembly instructions and identify the optional flange over the faucet opening.
• Footstep 2: Seal the new faucet. If y'all're using a gasket, identify the gasket on the lip of the plate and thread the hoses through. If using plumber'southward putty, apply it around the base of the faucet and set up the faucet in place.
• Step 3: Under the sink you can now thread on the flange and nut using a socket or bowl wrench.
• Footstep Four: If you're using pull-out faucets, a weight needs to exist added that volition retract the pull-out spray.
• Pace Five: Now it'south time to adhere the supply lines to the faucet and so to the shut-off valves. Cold water connects on the right and hot h2o on the left.
• Step Six: Plough on the h2o and check for leaking. If you detect any leaks you'll demand to tighten the connections on the h2o supply line.

MORE FROM QUESTIONSANSWERED.Net

Source: https://www.questionsanswered.net/article/how-to-replace-a-kitchen-faucet?utm_content=params%3Ao%3D740012%26ad%3DdirN%26qo%3DserpIndex

Posted by: wattsgase1970.blogspot.com

Share this post