How To Repair A Scraped Rim
How to Fix Scratched Rims
by Kenneth Coppens
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/0670382f-cdef-4919-9d56-1adb7e253ccd.jpg 877w)
Rich Ellgen/Demand Media
Scratched rims on an automobile is an almost inevitable occurrence. They can be caused by anything from running into a curb or driving over debris on the road. People who truly care about their machine volition be bothered by this, and some may fifty-fifty buy a whole new set of rims because they remember it's the only choice. It is much easier and cheaper to fix a scratched rim than most people realize.
Step 1
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/27c8ffd0-b644-4a46-8877-6695956f4566.jpg 877w)
Wash the entire wheel with dish lather and a sponge. Remove as much dirt and grease every bit you can. Rinse the rim with h2o.
Step 2
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/adaca8db-6ba2-40d3-b042-2a6c3099c75c.jpg 877w)
Pour paint thinner on one corner of the lint-complimentary cloth. Scrub the scratched expanse of the rim with the launder textile and be sure to remove any wax, clay or anything else that may exist on the rim. Wash it a couple times to exist safe.
Step 3
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/e7986921-8b33-4d5e-80b5-56ec8040dce0.jpg 877w)
Put masking tape directly around the scratched area. If the scratch is along the border of the rim, make sure the tape is tucked in underneath the rim so you do not damage the tire. It is all-time to exit nearly 1/4 inch of untaped area around all sides of the scratch.
Step four
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/afe45cad-b87f-4325-b692-0fc6fc518fef.jpg 877w)
Sand the scratched area with the 400 dust sandpaper until in that location are slight grooves in the entire untaped area.
Step v
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/fd2e1b0e-ac27-40a9-93c7-259c3b0dd884.jpg 877w)
Apply the Bondo putty to the scratch. Make sure it is completely covered with the putty.
Footstep half-dozen
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/5f62a038-a0db-49de-936b-84684fedc832.jpg 877w)
Sand the area with the 600 grit sand paper until the rim looks and feels smooth. The putty gets forced downwardly into the scratches which creates a smooth surface. Let it dry for five minutes and repeat this stride one more time. Let it dry for an additional five minutes.
Step seven
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/09cf5bd3-c411-42f3-a3a4-270f4978b54d.jpg 877w)
Cover the entire cycle, tire and whatsoever other nearby motorcar parts with masking paper to prevent lacquer or paint in unwanted areas.
Step eight
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/d6ba3494-2dae-4019-b27d-37f2a36d996a.jpg 877w)
Spray a sparse layer of lacquer or paint directly on the surface area beingness repaired. It doesn't affair which production you spray on information technology, just every bit long as it is the same color as the rim. A simple metallic argent volition work in virtually cases.
Stride 9
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/05d13706-0e88-447e-8ac5-f731a0698e93.jpg 877w)
Wait for the spray to dry out and then sand it with moisture 1200 dust sandpaper. Apply another layer of lacquer or pigment if the Bondo putty shows through.
Footstep ten
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/d3964e98-b166-41b6-ae4f-a06446787cc5.jpg 877w)
When the lacquer is dry out wash the entire wheel with dish soap and water.
Step 11
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/dd097dc0-b847-4e94-beff-ed1aa2d78ff0.jpg 877w)
Agree the tin can of articulate gloss lacquer about eight inches from the rim. Do a quick spray from one cease of the repaired section to the other end. Each spray should concluding no longer than a second. Do this nigh five times.
![itstillruns article image](https://img-aws.ehowcdn.com/877x500/s3.amazonaws.com/photography.prod.demandstudios.com/a3fba718-5d52-4fbb-93cb-94a80b5d752d.jpg 877w)
Remove all masking newspaper and masking tape. Let the rim dry overnight for best results.
References
Things Yous'll Demand
- Wheel lacquer or paint
- Loftier gloss clear lacquer
- Primer
- Bondo putty
- Pigment thinner
- Masking record
- Masking newspaper
- 400, 600 and 1200 wet/dry out sandpaper
- Lint-free wash material
- Dish lather
- Sponge
- Water
Author Bio
Kenneth Coppens began his freelance writing career in 2008. His passions in life consist of extensive personal research on food, gardening and finding natural and eco-friendly alternatives to nigh all aspects of life.
More Articles
Source: https://itstillruns.com/fix-scratched-rims-5384563.html
0 Response to "How To Repair A Scraped Rim"
Post a Comment